Quck answer
To reverse a doorknob, follow these steps:
1. Remove the doorknob by unscrewing the screws on the faceplate or by releasing the hidden latch on the side.
2. Take out the latch mechanism from the door and flip it over.
3. Reinsert the latch back into the door, making sure it is aligned properly.
4. Put the doorknob back on, aligning the screw holes with the latch mechanism.
5. Secure the doorknob by tightening the screws or re-engaging the hidden latch.
6. Test the doorknob to ensure it is functioning correctly in the reversed position.
Changing the direction of a doorknob is a quick and easy task that can be completed in just a few minutes. By unscrewing a couple of screws, you can turn the knob around to prevent children or pets from accidentally getting locked in a room. These instructions can also be used to move a doorknob to a different door, such as switching the locking door on your child’s room with the non-locking door of your closet. Simply follow the instructions below to remove and switch the knobs.
Step 1
Examine the screws in the plate that holds the doorknob to the door. If there is a + shape in the center, you will need a Phillips head screwdriver. If the screw has a single line cut into the head, you will need a flat head screwdriver.
Step 2
Use the appropriate screwdriver to remove the screws holding the doorknob to the door.
Step 3
Set the screws aside and gently pull the doorknob apart. Grasp the knobs on either side of the door and pull them away from the door, leaving the center mechanism in place. The knobs will remain attached to the plate that holds them to the door.
Step 4
You will see two long metal tubes protruding from each doorknob, with corresponding holes in the part of the doorknob that remains in the door. Take the knob that was on the inside of the door and place it on the outside, ensuring the tubes go through the holes.
Step 5
Take the knob that was on the outside of the door and place it on the inside, so the tubes meet the tubes on the other knob.
Step 6
Ensure both doorknobs are flush against the door.
Step 7
Insert the screws into the holes and use the screwdriver to tighten them.
FAQ
1. How do I reverse the doorknob on my door?
To reverse a doorknob, you will need to remove the doorknob from the door. Start by locating the screws on the plate of the doorknob. Use a screwdriver to unscrew the screws and remove the plate from the door. Once the plate is off, you will see the doorknob mechanism. Look for a small latch or pin that holds the doorknob in place. Press or pull the latch to release the doorknob from the mechanism. Flip the doorknob and reinsert it into the mechanism in the opposite direction. Secure the latch or pin to lock the doorknob in place. Finally, reattach the plate to the door using the screws. Your doorknob is now reversed!
2. Can I reverse a doorknob without removing it?
No, in most cases, you cannot reverse a doorknob without removing it. Reversing a doorknob requires accessing the mechanism inside the door, which is usually only possible by removing the doorknob. Removing the doorknob allows you to flip it and reinsert it in the opposite direction. If you attempt to reverse a doorknob without removing it, you may damage the mechanism or the door itself. It is best to follow the proper steps and remove the doorknob to ensure a successful reversal without causing any harm.
3. Are there any tools required to reverse a doorknob?
Yes, you will need a few tools to reverse a doorknob. The most common tool required is a screwdriver. A Phillips head screwdriver is usually used to unscrew the screws that hold the doorknob plate in place. Additionally, you may need a small flathead screwdriver or a pair of pliers to release the latch or pin that holds the doorknob in the mechanism. Make sure you have these tools on hand before attempting to reverse a doorknob to ensure a smooth process.
4. Can I reverse any type of doorknob?
In most cases, you can reverse any type of doorknob that has a standard mechanism. However, it is important to note that some specialized doorknob designs may not be reversible. For example, certain decorative or antique doorknobs may have unique mechanisms that do not allow for easy reversal. Additionally, some modern electronic doorknobs may not be reversible due to their complex locking systems. Before attempting to reverse a doorknob, it is recommended to check the manufacturer’s instructions or consult a professional to ensure that your specific doorknob can be reversed.
5. Are there any safety precautions I should take when reversing a doorknob?
Yes, there are a few safety precautions you should take when reversing a doorknob. First, make sure to turn off the power to any electronic locks or security systems connected to the door to prevent any accidental locking or unlocking during the process. Additionally, be mindful of any sharp edges or screws when handling the doorknob and use caution to avoid injuring yourself. If you are unsure about any steps or encounter any difficulties, it is recommended to seek the assistance of a professional locksmith to ensure a safe and successful doorknob reversal.