Quck answer
To access the diagnostic mode on a Kenmore Elite HE3 washer, follow these steps:
1. Make sure the washer is turned off.
2. Press and hold the “Control Lock” button for three seconds to unlock the control panel.
3. Press and hold the “Drain/Spin” button for five seconds.
4. Release the button and then press it again for five seconds.
5. The diagnostic mode will start, and the display will show codes for any detected issues.
6. Use the “Cycle Select” knob to navigate through the different tests and options.
7. Press the “Start” button to start a test or the “Cancel” button to exit the diagnostic mode.
Note: Accessing the diagnostic mode can help troubleshoot and identify problems with the washer’s components and functions.
Kenmore Elite HE3 washers are equipped with an automated test that can diagnose issues with various internal components. If your washer fails to complete a cycle or displays an alphanumeric error code on the screen, you may want to test for faults. The diagnostic test, which fills, drains, and spins the drum, takes several minutes to complete. Technicians use diagnostic mode to help identify the source of the problem.
Step 1
First, empty the drum and turn off the washing machine.
Step 2
Next, turn on the appliance by pressing the “Power” button and select the “Rinse/Drain & Spin” cycle using the cycle selection dial.
Step 3
Then, press the “Spin Speed” button repeatedly until “No Spin” appears.
Step 4
Finally, press the “Steam Treat” button four times in rapid succession. This will activate diagnostic mode and the washer will begin running tests.
FAQ
1. How do I access the diagnostic mode on my Kenmore Elite HE3 washer?
To access the diagnostic mode on a Kenmore Elite HE3 washer, start by unplugging the machine from the power source. Wait for a few minutes, then plug it back in. Press the “Control On” button to turn on the washer. Next, press the following buttons in sequence: “Prewash Options,” “Water Level,” “Prewash Options,” and “Water Level.” Finally, press the “Start” button. The diagnostic mode will be activated, and you can navigate through the different tests by turning the cycle selector knob.
2. What can I do in the diagnostic mode of my Kenmore Elite HE3 washer?
In the diagnostic mode of a Kenmore Elite HE3 washer, you can perform various tests to troubleshoot any issues with the machine. These tests include checking the water valves, motor operation, drain pump, and door lock. You can also retrieve error codes that will help identify the problem. Additionally, the diagnostic mode allows you to reset the washer’s control board if needed. It is a valuable tool for diagnosing and resolving common issues with the Kenmore Elite HE3 washer.
3. Can I access the diagnostic mode on my Kenmore Elite HE3 washer if it is not functioning properly?
If your Kenmore Elite HE3 washer is not functioning properly, it may be difficult to access the diagnostic mode directly. However, you can try a few troubleshooting steps before resorting to the diagnostic mode. Start by unplugging the washer from the power source, waiting for a few minutes, and then plugging it back in. If the issue persists, check the circuit breaker or fuse box to ensure there is power to the machine. If these steps do not resolve the problem, it is recommended to consult the user manual or contact a professional technician for assistance.