Quck answer
To change the blade on a Black & Decker jigsaw, follow these steps:
1. Unplug the jigsaw from the power source for safety.
2. Locate the blade release lever or knob on the jigsaw. It is usually located near the blade.
3. Hold down the blade release lever or knob and remove the old blade from the jigsaw.
4. Take the new blade and insert it into the jigsaw, making sure it is securely seated.
5. Release the blade release lever or knob to lock the new blade in place.
6. Plug the jigsaw back into the power source and test the new blade.
Remember to always refer to the jigsaw’s user manual for specific instructions and safety precautions.
Black & Decker, a company based in Towson, Maryland, offers a range of five jigsaws with varying amperages from 4.5 to 6. Higher-end models come with orbital forward-and-back motion as well as up and down. The procedure for changing the blade on both current and older models depends on the type of system used.
Quick-Change Blade Mechanism
Models with a clamping lever, such as the Linefinder Orbital Jigsaw, allow for a quick and easy blade replacement. First, turn off the jigsaw and unplug it, letting the used blade cool down. Pull up the saw-blade locking lever and shake the blade until it falls out. Turn the jigsaw upside down and insert the new blade shank into the blade holder with its teeth facing forward. Release the lever and wiggle the blade to ensure that it fits securely in place. For models with rollers, like the Accu-Trak, make sure to nestle the blade against the rollers.
Clamp or Hex Screws
For models with clamp or hex screws, like the single-speed jigsaw, loosen the pair of screws on the front of the mechanism by turning them counterclockwise with a flathead screwdriver. Do not remove them completely. The used blade will fall out, and you can insert the new blade fully into the clamp. Lightly tighten each screw alternately and then fully. For older models with a single hex screw on the side of the blade, loosen it enough to remove the blade and then carefully insert a new blade with the teeth facing forward. Retighten the screw.
FAQ
1. How often should I change the blade on my Black & Decker Jigsaw?
You should change the blade on your Black & Decker Jigsaw whenever you notice it becoming dull or worn. A dull blade can lead to poor cutting performance and can even be dangerous. It is a good idea to inspect the blade before each use to ensure it is in good condition.
2. What tools do I need to change the blade on my Black & Decker Jigsaw?
To change the blade on your Black & Decker Jigsaw, you will need a screwdriver, a pair of pliers, and a new jigsaw blade. Make sure you have these tools handy before starting the blade replacement process.
3. How do I remove the old blade from my Black & Decker Jigsaw?
To remove the old blade from your Black & Decker Jigsaw, first, unplug the tool from the power source. Then, locate the blade release lever near the front of the jigsaw. Depress the lever and carefully pull the old blade out of the tool. Be cautious as the blade may still be sharp.
4. How do I install a new blade on my Black & Decker Jigsaw?
To install a new blade on your Black & Decker Jigsaw, first, ensure the tool is unplugged. Then, align the new blade with the blade holder, making sure the teeth are facing forward. Push the blade into the holder until it clicks into place. Give it a gentle tug to ensure it is securely attached.
5. Can I use any type of blade with my Black & Decker Jigsaw?
No, it is important to use the appropriate type of blade for your Black & Decker Jigsaw. Refer to the tool’s manual or the blade packaging to determine the correct blade type for your specific jigsaw model. Using the wrong blade can result in poor cutting performance and can damage the tool.
6. How do I ensure the blade is securely tightened on my Black & Decker Jigsaw?
After installing a new blade on your Black & Decker Jigsaw, use a screwdriver to tighten the blade screw or blade clamp. Ensure it is securely fastened, but be careful not to overtighten, as this can damage the blade or the tool.
7. Are there any safety precautions I should take when changing the blade on my Black & Decker Jigsaw?
Yes, always remember to unplug the tool from the power source before changing the blade. Additionally, wear protective gloves to avoid any potential injuries. Take your time and be cautious throughout the blade replacement process.