Quck answer
LED speaker lights are a great way to enhance your audio experience. To hook them up, follow these simple steps:
1. Choose the LED speaker lights that suit your preferences and speaker system.
2. Identify the power source for the lights. They can be powered by batteries, USB, or an external power adapter.
3. Connect the LED lights to the power source using the appropriate cables. If using batteries, make sure they are properly installed.
4. Position the LED lights around your speakers, ensuring they are securely attached.
5. Adjust the settings on the LED lights, such as brightness or color, according to your preference.
6. Test the lights by playing music through your speakers. Enjoy the enhanced visual experience!
Remember to consult the user manual that comes with your LED speaker lights for specific instructions and troubleshooting tips.
Flashing LED lights are a popular addition to nightclubs and for car stereo enthusiasts who want to synchronize their music with a light show. These LED lights come in wall-mounted strips or flexible cables and can be connected to your speaker’s positive and negative terminals. Typically, LED systems have wires for the left and right speakers. During stereo playback, the audio channels activate different LEDs to create a sense of movement. The LED wires come with the set and can be connected directly to your speakers.
Step 1:
First, turn off the amplifier and unplug it from the power source.
Step 2:
Unlock the two terminals on the back of the left speaker by pressing the tabs, and pull out the two wires. The red terminal is positive, and the other wire is negative.
Step 3:
Twist the positive speaker wire with the bare positive wire on the LED lights, and leave the negative LED wire hanging for now. The LED system wires typically have a label that says “Left” or “L” to distinguish them from the right audio wires.
Step 4:
Twist the bare negative LED wire with the negative speaker wire.
Step 5:
Reconnect the wire pairs to the positive and negative terminals on the rear of the left speaker.
Step 6:
Twist together the two wires for the LED system’s right-audio with the positive and negative wires that run from the amplifier to your right speaker. Reconnect the wire pairs to the right speaker terminals.
Step 7:
Finally, plug in the amplifier’s power cord. When you play an audio source through the amp, a small electrical pulse is sent to the speakers and the LEDs.