Quck answer
To put together a Sleep Number bed, follow these steps:
1. Unbox the bed components and lay them out in the desired location.
2. Assemble the base by following the instructions provided in the manual.
3. Attach the headboard, if applicable, using the provided hardware.
4. Place the mattress on top of the base.
5. Connect the air hoses from the mattress to the base using the provided connectors.
6. Plug in the power cord to inflate the mattress to your desired firmness level.
7. Adjust the firmness using the remote control or SleepIQ app, if applicable.
8. Add any additional accessories or bedding to complete the setup.
With these simple steps, you can easily assemble a Sleep Number bed and start enjoying a personalized sleep experience.
If you’ve recently purchased a Sleep Number bed, you now own a slice of paradise. However, your new bed will come in multiple boxes, requiring you to assemble it yourself. Fortunately, it’s a simple task that shouldn’t take more than half an hour to complete (excluding the time it takes to fill the air chambers, which could take around 10 minutes).
Image Credit:
JZhuk/iStock/GettyImages
Construct the Modular Base
Sleep Number beds come with durable, plastic modular bases that replace the traditional box spring. You can set this up directly on the floor if your existing headboard doesn’t have a bed frame. Avoid placing the base on top of a box spring.
The easy-to-assemble pieces interlock with each other, consisting of two side rails, six support beams, and four deck panels for a queen bed. Each side component is labeled with either “A” or “B.” Connecting each “side A” to a “side B” is straightforward, and you’ll hear the pieces click into place. Use the provided pins to secure these pieces in place. You should now have two independent rails.
Next, install the support beams. Start by inserting one of the support beams into the end of the side rails at the head of the bed. Keep in mind that the tabs on the support beams should be facing upward. The joints should fit snugly but should slide into place with ease. Repeat this process for the remaining five support beams, placing them in their respective slots.
The six support beams and two side rails should be flush on both the top and bottom.
Place the Firmness Control System in Position
The Firmness Control System, which pumps air into the bed’s two chambers, should be situated inside the first section of the base. If the base is on the floor, the Firmness Control System should be outside of the base at the head of the bed. It should be plugged into a surge protector for safety reasons.
Next, add the deck panels. They will slide and lock into place on top of the frame you’ve just constructed. All of these pieces interlock with each other, creating a flat and sturdy platform for your new Sleep Number mattress.
If you want to connect your headboard to the base, you’ll need to purchase mounting brackets and modular base legs from the Sleep Number store. The legs will lift the mattress off the floor, allowing you to attach the brackets from the base to your headboard.
Lastly, put on the coverlet, which is similar to a fitted sheet. This will cover the base, giving the bed a more polished appearance.
Construct the Mattress
Now, it’s time for the exciting part! Place the mattress cover on top of the base you’ve just assembled. Ensure that the holes for the pump hoses are at the head of the bed.
To start, place the long, thick foam pieces. The two long foam pieces should be placed along the length of the bed, while the shorter pieces should be placed at the head and foot. Slide each notch into another piece, but do not lock them into place. These foam pieces will help reinforce the mattress’s sides.
Next, insert the foam base. It should sit flat between the foam sides. The air chambers should be placed on top with both hose connections facing the head of the bed.
Now, it’s time to hook up the firmness control system. Make sure to connect the left hose, marked “L,” to the left side of the air chamber through the opening on the left side of the mattress cover. Repeat this process for the right side. With the remote control, inflate both chambers to 100 by pressing and holding the “fill” button. Once the setup process is complete, you can adjust the bed to your desired Sleep Number.
Add the pillow top and foam comfort pads by putting the duvet cover or pillow top on top of the inflated air chambers, lining up the zippers. Connect the zippers that are closest to the floor. Next, unzip the top zipper to open the duvet cover and place the foam comfort pads with their ridges facing up. Finally, add the border wrap on top and zip the duvet cover closed.
Lastly, set your Sleep Number by slowly decreasing it until you reach your desired comfort level while laying on your back. Repeat this process on the other side or have your partner do so. Once complete, you can add sheets and blankets to your bed and take a long nap!
FAQ
1. What is a Sleep Number bed?
A Sleep Number bed is a type of adjustable bed that allows you to customize the firmness of your mattress to your personal preference. It uses air chambers inside the mattress that can be adjusted to different levels of firmness, ranging from soft to extra firm. This allows you to find your ideal level of comfort and support for a good night’s sleep.
2. How do I assemble a Sleep Number bed?
Assembling a Sleep Number bed is relatively simple. Start by unpacking all the components and laying out the mattress, base, and frame. Follow the instructions provided by Sleep Number, which usually involve attaching the base and frame together, connecting the air pump to the mattress, and securing any additional components. Make sure to tighten all the screws and bolts properly to ensure stability.
3. Can I put a Sleep Number bed on any type of bed frame?
Yes, you can put a Sleep Number bed on most types of bed frames. Sleep Number beds are designed to be compatible with a variety of bed frames, including platform beds, adjustable bases, and traditional frames with a box spring. However, it’s important to check the specific requirements of your Sleep Number model to ensure compatibility and proper support.
4. Can I use my existing sheets and bedding with a Sleep Number bed?
Yes, you can use your existing sheets and bedding with a Sleep Number bed. Sleep Number mattresses are designed to fit standard sheet sizes, so there is no need to purchase special bedding. However, it’s important to make sure the fitted sheet is deep enough to accommodate the height of the mattress and any additional layers, such as a mattress pad or topper.
5. How often should I adjust the firmness of my Sleep Number bed?
The frequency of adjusting the firmness of your Sleep Number bed depends on your personal preference and comfort level. Some people may prefer to adjust it on a nightly basis to find their ideal firmness for each night’s sleep, while others may only make occasional adjustments. It’s recommended to experiment with different firmness levels until you find what works best for you, and then make adjustments as needed.
6. How do I clean a Sleep Number mattress?
When it comes to cleaning a Sleep Number mattress, it’s important to follow the manufacturer’s instructions. In general, you can spot clean the mattress using a mild detergent and water solution, gently rubbing the stained area with a clean cloth. Avoid using harsh chemicals or excessive moisture, as this can damage the mattress. It’s also recommended to regularly vacuum the mattress to remove any dust or allergens.
7. Are Sleep Number beds suitable for couples with different firmness preferences?
Yes, Sleep Number beds are an excellent option for couples with different firmness preferences. The dual air chambers inside the mattress allow each side to be adjusted independently, so you and your partner can have your own personalized level of firmness. This ensures that both individuals can sleep comfortably and wake up refreshed, regardless of their individual needs and preferences.