Quck answer
To remove the upper rack in a GE Profile dishwasher, follow these steps:
1. Open the dishwasher door and slide out the upper rack completely.
2. Locate the plastic clips on each side of the rack that hold it in place.
3. Press down on the plastic clips and slide them towards the center of the rack.
4. Lift the front of the rack slightly and pull it forward to release it from the dishwasher tracks.
5. Carefully lift the rack out of the dishwasher and set it aside.
By following these simple steps, you can easily remove the upper rack in your GE Profile dishwasher for cleaning or replacement.
Similar to other dishwasher brands, your GE Profile dishwasher has two dish racks. The upper rack may encounter issues such as stuck rollers, loose sliding rails, or rust. When this happens, the upper rack needs to be removed for repair. However, removing the upper rack of a GE Profile dishwasher requires some additional steps beyond simply sliding it out.
Step 1
Open the dishwasher door and pull out the upper rack until it is fully extended as if you were loading it.
Step 2
Locate the square tab on the rails at each side of the rack near the end. Press the plastic tab inward with your fingers, and detach the plastic end cap from the rail. If necessary, insert a small flat-head screwdriver between the tab and inside rail, and gently pry the tab toward the rack. Be careful not to apply too much pressure, as the plastic may break under extreme force.
Step 3
With both hands, grasp the upper rack on each side and pull it out of the rails and away from the dishwasher. While working, push the rails back into the dishwasher to avoid accidentally bumping into them.
FAQ
1. How do I remove the upper rack in my GE Profile dishwasher?
To remove the upper rack in a GE Profile dishwasher, start by sliding the rack all the way out of the dishwasher. Next, locate the plastic tabs on each side of the rack. Push these tabs down while pulling the rack up and out of the dishwasher. Be careful not to force it, as the rack should come out easily once the tabs are released.
2. Can I remove the upper rack to create more space for larger dishes?
Yes, you can remove the upper rack in a GE Profile dishwasher to create more space for larger dishes. This can be useful when you need to wash tall glasses or pots and pans that don’t fit on the lower rack. Just follow the same steps mentioned earlier to remove the rack, and you’ll have more room for your larger items.
3. Do I need any tools to remove the upper rack?
No, you don’t need any tools to remove the upper rack in a GE Profile dishwasher. The rack is designed to be easily removed by hand. Simply use your fingers to push down the plastic tabs on each side of the rack, and then lift it up and out of the dishwasher.
4. Can I clean the upper rack separately once it’s removed?
Yes, you can clean the upper rack separately once it’s removed from the GE Profile dishwasher. You can wash it by hand using warm soapy water or place it in the dishwasher itself. Just make sure to remove any large food debris before cleaning and rinse the rack thoroughly before placing it back in the dishwasher.
5. How often should I remove and clean the upper rack?
It is recommended to remove and clean the upper rack in a GE Profile dishwasher every few months. This will help prevent any buildup of dirt, food particles, or mineral deposits that can affect the dishwasher’s performance. Regular cleaning will ensure that your dishes come out clean and sparkling every time.