Quck answer
To clean the drain pump on a Frigidaire Affinity washing machine, follow these steps:
1. Unplug the washing machine and turn off the water supply.
2. Locate the drain pump at the bottom of the machine. It is usually behind a small panel.
3. Remove any screws or clips securing the panel and take it off.
4. Place a towel or bucket underneath the pump to catch any water that may spill out.
5. Unscrew the drain pump filter and remove any debris or clogs.
6. Use a brush or toothbrush to clean the filter thoroughly.
7. Reattach the filter, panel, and secure them with screws or clips.
8. Plug the machine back in and turn on the water supply.
Regularly cleaning the drain pump can help prevent clogs and maintain the efficiency of your Frigidaire Affinity washing machine.
The drain pump is a crucial component of the Frigidaire Affinity washing machine, responsible for draining water during the wash cycle. Unfortunately, small objects like coins, keys, and hair accessories can clog the pump and disrupt its function. Here is how to access and clean the drain pump.
Removing the Front Panel
Step 1
Disconnect the power supply of the Frigidaire Affinity washing machine.
Step 2
Lift the front of the washing machine and support it using a 2-by-4-inch block of wood at the center front.
Step 3
Remove the two screws located under the washing machine on the bottom of the front panel.
Step 4
Detach the panel from the washer by pulling it down.
Accessing and Cleaning the Drain Pump
Step 1
Locate the drain pump on the bottom right of the washing machine and place towels underneath it.
Step 2
Disconnect the inlet sump, a white dial-like component, and the outlet hose from the pump.
Step 3
Remove the two screws that attach the pump housing to the bottom of the washing machine and unplug the motor wires.
Step 4
Release the tab on the drain pump valve in the pump outlet and pull back on the valve shield. Then, use a flat screwdriver to release the tab on each side of the motor and remove the four screws holding the drain pump on the housing.
Step 5
Remove the clamp on the bottom front of the drain pump and pull down on the coin trap to access the area that typically clogs. Clean the drain pump filter thoroughly to remove any residue, debris, or foreign objects.
FAQ
1. Why is it important to clean the drain pump on a Frigidaire Affinity?
Cleaning the drain pump on a Frigidaire Affinity is important to maintain the efficiency and functionality of the washing machine. Over time, debris, lint, and other foreign objects can accumulate in the drain pump, leading to clogs and drainage issues. Regular cleaning helps prevent blockages, ensures proper drainage, and prevents potential damage to the pump and other components of the washing machine.
2. What tools are needed to clean the drain pump?
To clean the drain pump on a Frigidaire Affinity, you will need a few basic tools, including a screwdriver, pliers, a bucket or towels to catch any water, and a small brush or toothbrush to remove debris. It is also recommended to have gloves and protective eyewear for safety during the cleaning process.
3. How often should the drain pump be cleaned?
The frequency of cleaning the drain pump on a Frigidaire Affinity depends on usage and the amount of debris present in the washing machine. As a general guideline, it is recommended to clean the drain pump every 6-12 months or if you notice any drainage issues. However, if you regularly wash items that shed a lot of lint or have pets, more frequent cleaning may be necessary.
4. What are the steps to clean the drain pump?
To clean the drain pump on a Frigidaire Affinity, start by unplugging the washing machine and turning off the water supply. Locate the drain pump filter, usually located at the front or back of the machine. Use a screwdriver to remove the filter cover and use pliers to unscrew the filter. Remove any debris or lint from the filter, clean it with a brush or toothbrush, and rinse it with water. Reattach the filter, secure the cover, and plug the machine back in.
5. Are there any precautions to take while cleaning the drain pump?
While cleaning the drain pump on a Frigidaire Affinity, it is important to take certain precautions. Always unplug the washing machine and turn off the water supply before starting the cleaning process. Use gloves and protective eyewear to avoid any injuries. Additionally, be cautious when handling the drain pump filter as it may contain sharp objects or debris. If unsure, consult the user manual or contact a professional for assistance.
6. What are the signs of a clogged drain pump?
There are a few signs that indicate a clogged drain pump on a Frigidaire Affinity. These include slow or incomplete draining, water pooling in the drum after a wash cycle, unusual noises during drainage, and error codes displayed on the machine. If you notice any of these signs, it is recommended to clean the drain pump to resolve the issue.
7. Can I clean the drain pump myself, or do I need professional help?
Cleaning the drain pump on a Frigidaire Affinity can be done by most homeowners without professional help. The process is relatively simple and can be completed using basic tools. However, if you are uncomfortable performing the task or encounter any difficulties, it is advisable to seek professional assistance to ensure proper cleaning and avoid any potential damage to the washing machine.