Quck answer
To clean a GE Potscrubber dishwasher filter, follow these steps:
1. Remove the bottom rack of the dishwasher to access the filter.
2. Twist the filter counterclockwise to unlock it and lift it out of the dishwasher.
3. Rinse the filter under running water to remove any debris.
4. Use a soft brush or toothbrush to scrub away any remaining residue.
5. Inspect the filter for any damage or wear and replace if necessary.
6. Place the filter back into the dishwasher and twist it clockwise to lock it into place.
7. Reinstall the bottom rack and close the dishwasher door.
8. Run a test cycle to ensure the dishwasher is functioning properly.
Regularly cleaning the filter will help maintain the performance of your GE Potscrubber dishwasher and ensure clean dishes every time.
A filter screen is used in the interior bottom of GE Potscrubber dishwashers to prevent food debris from entering the pump and potentially clogging the kitchen drain. Regular maintenance of this appliance involves cleaning the filter screen at least once a month or as needed, if water stops draining properly. The filter can be easily removed for cleaning.
Step 1
To unlock the latch, turn the lever in the top of the door to the right and lower the door.
Step 2
Locate the filter screen inside the GE Potscrubber near the front of the appliance in the bottom by sliding out the lower rack. You may need to rotate the spray arm to access the filter screen.
Step 3
Carefully lift out the filter screen by twisting it one-half turn to the right to avoid spilling any debris caught in the screen. Remove the separate filter underneath as well.
Step 4
Scrub the parts with a nylon brush in the sink and rinse with cold water until clean.
Step 5
Insert the filter and replace the screen, twisting one-half turn to the right to lock it in place.
Step 6
Close the Potscrubber by pushing in the bottom rack and raising the door.
FAQ
1. How often should I clean the GE Potscrubber dishwasher filter?
You should clean the GE Potscrubber dishwasher filter at least once a month to ensure optimal performance. Over time, the filter can become clogged with food particles, grease, and other debris, which can affect the dishwasher’s ability to clean dishes effectively. Regular cleaning will help prevent these issues and keep your dishwasher running smoothly.
2. What is the best way to clean the GE Potscrubber dishwasher filter?
To clean the GE Potscrubber dishwasher filter, first, remove the bottom rack from the dishwasher. Locate the filter at the bottom of the dishwasher and twist it counterclockwise to release it. Rinse the filter under warm water to remove any loose debris. For a deeper clean, soak the filter in a mixture of warm water and mild detergent for about 15 minutes. Scrub the filter gently with a soft brush to remove stubborn residue. Rinse the filter thoroughly and reinstall it in the dishwasher.
3. Can I put the GE Potscrubber dishwasher filter in the dishwasher?
No, you should not put the GE Potscrubber dishwasher filter in the dishwasher. The filter is not designed to withstand the high temperatures and rigorous cleaning cycles of the dishwasher. Instead, it should be cleaned by hand using warm water and mild detergent. This will help preserve the integrity of the filter and ensure its longevity. Remember to always follow the manufacturer’s instructions for proper care and maintenance of your GE Potscrubber dishwasher.