Quck answer
To reset the control panel on a Maytag Jet Dry dishwasher, follow these steps:
1. Press and hold the “Heated Dry” button for about 3 seconds.
2. Release the button and then immediately press and hold the “Normal” button.
3. Keep holding the “Normal” button for another 3 seconds, then release it.
4. The control panel should now be reset, and any error codes or settings should be cleared.
Note: This reset process may vary slightly depending on the model of your Maytag dishwasher. It’s always a good idea to consult the user manual for specific instructions for your appliance.
Maytag Corporation, a well-known appliance manufacturer and a division of the Whirlpool Corporation, was founded in Newton, Iowa in 1893. The Jetclean Plus dishwashers by Maytag are large capacity undercounter dishwashers that can wash up to 14 place settings per load and are specifically designed for use with rinsing aids such as Jet-Dry. Sometimes, the electronic control panel malfunctions and activates the demo mode, causing the control panel lights to flash and preventing any dishwashing cycles from running. Follow these steps to reset the control panel and restore normal dishwasher function.
Step 1
Open and close the door of your Maytag dishwasher.
Step 2
Find the “Rinse” button on the dishwasher control panel and press it five times quickly.
Step 3
Press the adjacent “Drain/Off” button on the control panel twice to deactivate the demo mode of the dishwasher.
FAQ
1. How do I reset the control panel on my Maytag Jet Dry dishwasher?
To reset the control panel on a Maytag Jet Dry dishwasher, you can follow these steps:
1. Start by turning off the dishwasher and unplugging it from the power source.
2. Wait for at least one minute to allow the dishwasher to completely reset.
3. Plug the dishwasher back in and turn it on.
4. Press and hold the “Heated Dry” button for about three seconds.
5. Release the button and wait for the control panel to reset.
6. Once the control panel is reset, you can now use your Maytag Jet Dry dishwasher as usual.
2. Why is it necessary to reset the control panel on a Maytag Jet Dry dishwasher?
Resetting the control panel on a Maytag Jet Dry dishwasher can help resolve various issues and malfunctions. It is necessary to reset the control panel when the dishwasher is not responding to commands, experiencing a software glitch, or displaying error codes. Resetting the control panel allows the dishwasher to reboot and start fresh, which can often fix minor issues. Additionally, if you have recently made changes to the dishwasher’s settings and want to revert back to the default settings, resetting the control panel is an effective way to do so.
3. Are there any precautions I should take when resetting the control panel on a Maytag Jet Dry dishwasher?
While resetting the control panel on a Maytag Jet Dry dishwasher is a relatively simple process, it is important to take a few precautions:
1. Make sure the dishwasher is turned off and unplugged before attempting to reset the control panel.
2. Avoid pressing any other buttons on the control panel while resetting to prevent accidental changes or further malfunctions.
3. Wait for at least one minute after unplugging the dishwasher to ensure a complete reset.
4. If the dishwasher continues to display issues or error codes after resetting the control panel, it may require further inspection or professional assistance.