Quck answer
If the clean light on your KitchenAid dishwasher is flashing, it indicates a problem with the dishwasher. Here are some troubleshooting steps to help you resolve the issue:
1. Reset the dishwasher: Turn off the dishwasher and unplug it from the power source for a few minutes. Then, plug it back in and try running a new cycle.
2. Check for error codes: Look for any error codes displayed on the control panel. Refer to the dishwasher’s manual to understand what the codes mean and how to address them.
3. Inspect the door latch: Ensure that the dishwasher door is properly closed and latched. A faulty door latch can prevent the dishwasher from operating correctly.
4. Clean the dishwasher: Remove any debris or food particles from the dishwasher’s filters, spray arms, and drain. A clogged or dirty dishwasher can cause issues with the clean light.
5. Call for professional help: If the above steps don’t resolve the issue, it may be best to contact a professional technician for further diagnosis and repair.
Remember to always prioritize your safety when troubleshooting any appliance.
KitchenAid dishwashers have a range of features, including cup racks, adjustable racks, automatic detergent dispensers, and more. However, if the “Clean” light on the control panel flashes rapidly, there might be an issue with the water temperature in the dishwasher. Here’s what you can do:
Step 1
Reset the dishwasher by pressing “High Temp Wash” and “Heated Dry” four times in a row, followed by one last “High Temp Wash.” This will reset the control board of the dishwasher.
Step 2
Wait for the lights on the control panel to become solid. Press “Cancel/Drain.”
Step 3
Run hot water at the kitchen sink until it becomes hot. Turn off the water and choose a new wash cycle on the dishwasher. Press “Start” and let the full cycle complete.
Step 4
If the “Clean” light continues to blink, contact KitchenAid for professional service. This could indicate a service error that requires repair by a professional, such as a damaged or broken control board, heater, or thermostat, or issues with water pressure.
FAQ
1. Why is the clean light flashing on my KitchenAid dishwasher?
The clean light on your KitchenAid dishwasher may flash to indicate a problem with the dishwasher’s operation. It could be due to a variety of reasons, such as a malfunctioning heating element, a clogged filter, or a problem with the water supply. It is important to troubleshoot the issue to identify the specific cause and resolve it.
2. How can I reset the clean light on my KitchenAid dishwasher?
To reset the clean light on your KitchenAid dishwasher, you can try pressing the “Heated Dry” button followed by the “Normal Wash” button. Repeat this process three times within five seconds. This should reset the dishwasher and clear the flashing clean light. If the problem persists, you may need to consult the dishwasher’s user manual or contact KitchenAid customer support for further assistance.
3. What should I do if the clean light continues to flash after resetting?
If the clean light on your KitchenAid dishwasher continues to flash even after resetting it, there may be an underlying issue that requires further troubleshooting. Check the dishwasher’s manual for any specific instructions on understanding the flashing light codes. You can also try disconnecting the dishwasher from the power source for a few minutes and then reconnecting it to see if that resolves the issue.
4. Can a clogged filter cause the clean light to flash?
Yes, a clogged filter in your KitchenAid dishwasher can cause the clean light to flash. The filter is responsible for trapping food particles and debris, preventing them from clogging the dishwasher’s spray arms and drain pump. If the filter becomes clogged, it can affect the dishwasher’s ability to clean dishes properly and may trigger the clean light to flash. Regularly cleaning and maintaining the filter can help prevent this issue.
5. Is it possible for a faulty heating element to cause the clean light to flash?
Yes, a faulty heating element in your KitchenAid dishwasher can cause the clean light to flash. The heating element is responsible for heating the water during the wash cycle to ensure effective cleaning. If the heating element malfunctions or fails, it can affect the dishwasher’s performance and trigger the clean light to flash. In such cases, it may be necessary to replace the heating element to resolve the issue.
6. Can a problem with the water supply trigger the clean light to flash?
Yes, a problem with the water supply can trigger the clean light to flash on your KitchenAid dishwasher. If the dishwasher does not receive an adequate supply of water, it may not be able to clean the dishes properly, leading to the clean light flashing. Check if the water supply valve is fully open and the water pressure is sufficient. Additionally, inspect the dishwasher’s water inlet valve for any clogs or defects that may be hindering the water supply.
7. When should I consider contacting KitchenAid customer support for assistance?
If you have followed the troubleshooting steps and the clean light on your KitchenAid dishwasher continues to flash, it may be necessary to contact KitchenAid customer support for further assistance. They can provide you with specific guidance based on your dishwasher model and help you determine the best course of action to resolve the issue. Additionally, if your dishwasher is still under warranty, contacting customer support can help you explore any available repair or replacement options.