Quck answer
Noma air conditioner controls are easy to use and navigate. Here are the main steps to operate them:
1. Power on/off: Locate the power button and press it to turn the air conditioner on or off.
2. Mode selection: Choose the desired mode (cooling, heating, fan only, etc.) using the mode button. Each press of the button will cycle through the available options.
3. Temperature control: Adjust the temperature using the up and down arrows. Press the up arrow to increase the temperature or the down arrow to decrease it. The current temperature setting is usually displayed on the control panel.
4. Fan speed: Use the fan speed button to select the desired fan speed (low, medium, high, or auto). Each press of the button will cycle through the available options.
5. Timer setting: If you want the air conditioner to turn on or off at a specific time, use the timer function. Press the timer button and set the desired time using the up and down arrows.
Remember to refer to the user manual for specific instructions for your Noma air conditioner model.
Noma offers a range of window air conditioners that come in different sizes. Although each model may have slight differences, their capabilities and function controls are quite similar. After completing the installation of your A/C unit, it is essential to understand how to use Noma air conditioner controls to optimize its performance, regardless of the model you have.
Turning the A/C Unit On or Off and Choosing a Mode
Press the power button on the control panel to turn on the air conditioner and press it again to turn it off. Once the unit is on, the mode indicator lights will show which mode your air conditioner is running and enable you to switch to a different mode. Press the mode button repeatedly until the LED light indicates your preferred mode:
- Fan mode runs the fan without cooling the room.
- Dry mode removes moisture in the conditioned area and selects the optimal temperature while operating at low speed.
- Cool mode chills the conditioned area.
- Eco mode saves energy by intermittently operating the compressor and running the fan at low speed when the compressor is off.
Adjusting the Temperature
Your Noma air conditioner lets you set the room temperature anywhere between 61 and 86 degrees Fahrenheit. The compressor will automatically cool the room according to the temperature setting.
- Press and hold the mode and down arrow buttons simultaneously for five seconds to switch between Fahrenheit and Celsius displays.
- To increase the temperature by one degree, press the “up” arrow button once.
- To decrease the temperature by one degree, press the “down” arrow button once.
Adjusting the Fan Speed
You can choose the fan speed of your Noma air conditioner when in cool, dry, or fan mode. Press the fan speed button once to switch from one speed to the next. Pressing it again scrolls through the different speeds: high, medium, and low.
Using the Remote Control
The remote control that comes with your Noma air conditioner has a simpler display than the window unit and allows you the same control as the window unit plus additional controls.
Use the power, fan, mode, and temperature selector buttons as you would with the control panel on the air conditioner. Use the air conditioner’s display to determine your selections.
Press the dimmer button on the remote to turn off the control panel’s display. Pressing the filter button on the remote turns off the clean filter indicator light after filter cleaning.
Using the Sleep Function
The sleep function controls operate from the remote control. During sleep mode, the air conditioner gradually increases the temperature for two hours and then turns off.
- Set the mode, fan speed, and temperature to your liking.
- Press the sleep button. The display dims after ten seconds.
- To turn off sleep mode, press the sleep button again.
Setting the Timer Function
The timer function on your Noma air conditioner allows you to set the unit to turn on or off between one to twenty-four hours in advance.
To use the air conditioner’s timer function, first adjust the mode, fan speed, and temperature to your preference. Then, press the timer button on the remote control. The display will flash, allowing you to set the timer duration in hours using the up and down arrow buttons. Confirm your settings by pressing the timer button again. If you want to turn off the timer function, simply press the timer button a second time.
FAQ
1. What are the basic functions of Noma air conditioner controls?
Noma air conditioner controls provide various functions to ensure comfortable and efficient cooling. The basic functions include adjusting the temperature, controlling the fan speed, selecting the mode (cooling, heating, dehumidifying), and setting the timer. The temperature can be increased or decreased using the up and down buttons, while the fan speed can be adjusted to low, medium, or high. The mode button allows you to switch between different modes depending on your needs. The timer function allows you to set the air conditioner to turn on or off at a specific time.
2. How do I set the temperature on a Noma air conditioner?
To set the temperature on a Noma air conditioner, locate the temperature control buttons on the control panel. Press the up or down button to increase or decrease the temperature, respectively. Keep adjusting until you reach your desired temperature setting. The display panel will show the current temperature setting, allowing you to monitor and make further adjustments if needed. It is recommended to set the temperature at a comfortable level, typically between 22 to 26 degrees Celsius (72 to 78 degrees Fahrenheit), for optimal cooling performance.
3. Can I program the timer on a Noma air conditioner?
Yes, you can program the timer on a Noma air conditioner to turn on or off at a specific time. To do this, locate the timer button on the control panel. Press the button and use the up and down buttons to set the desired time. Ensure to select the appropriate AM or PM setting. Once the timer is set, the air conditioner will automatically turn on or off at the programmed time. This feature is useful for energy-saving purposes, allowing you to have the air conditioner running only when needed, such as when you are about to arrive home or when you are about to sleep.