Quck answer
To clean a Maytag Quiet Series dishwasher filter, follow these simple steps:
1. Remove the bottom rack of the dishwasher to access the filter.
2. Unscrew the cover of the filter and lift it out.
3. Rinse the filter under running water to remove any debris or food particles.
4. Inspect the filter for any clogs or damage and clean or replace it if necessary.
5. Use a soft brush or toothbrush to clean the filter and remove any stubborn residue.
6. Reinstall the filter and secure the cover back in place.
7. Put the bottom rack back into the dishwasher.
8. Run a test cycle to ensure the dishwasher is working properly.
Regularly cleaning the filter will help maintain the performance of your Maytag Quiet Series dishwasher.
If you own a Maytag Quiet Series dishwasher, you would have experienced a noise-free and efficient cleaning of your dishes. However, with time, you may notice that the dishes are not as clean as before, which could indicate a problem with the dishwasher or just a need to clean the filter. Cleaning the dishwasher filter is a simple task that you can do on your own.
Maytag Dishwasher Filter
The filter of a Maytag Quiet Series dishwasher collects food particles over time. This is its intended function – to prevent food from obstructing the dishwasher or your plumbing, as explained by Maytag. In addition, this type of dishwasher also has a drain grate that can get clogged with food and needs to be cleaned whenever you clear out the filter. It is normal for these parts to collect food and other particles since they prevent it from reaching your dishes and pipes.
How to Clean the Filter
To clean the filter of a Maytag Quiet Series 300 dishwasher, unlatch the appliance and pull out the lower rack to access the bottom of the unit. You will see a circular drain grate at the bottom of the dishwasher. Remove the drain grate and shake out any accumulated food particles into the garbage can. Wash it with soap and water. Next, take out the filter from beneath the drain grate and wash it under cold water in your kitchen sink. You can use an abrasive sponge, pipe cleaner, or old toothbrush to clean the filter. Once done, allow the filter to dry before placing it back into the dishwasher.
Replacing the Filter
Before replacing the dishwasher filter, splash it with some lemon juice to keep it fresh and give your dishes a citrusy scent. Replace the filter in its compartment, cover it with the drain grate, and place the bottom rack back into the dishwasher. Reload the appliance and run it again to ensure that your dishes are now cleaner. If they are still not clean, run an empty load with vinegar or a dishwasher cleaner, which are made with strong citrus agents, to remove hard water and other buildup. Cleaning the lower spray arms of the dishwasher periodically is also a good idea.
By taking good care of the filter and drain grate, your Maytag Quiet Series 200 dishwasher (or any other model in the series) will perform better and provide you with cleaner dishes. Regular maintenance cleaning and the use of vinegar or citrus in your dishwasher will ensure optimal cleaning performance.