Quck answer
Cleaning a Whirlpool ice maker is a simple process. Here are the steps:
1. Turn off the ice maker and unplug it from the power source.
2. Remove the ice bin and any remaining ice from the maker.
3. Use a mild soap and warm water to clean the ice bin thoroughly. Rinse it well and let it dry completely.
4. Use a soft cloth or sponge to clean the interior of the ice maker. Pay special attention to any buildup or debris.
5. Wipe down the exterior of the ice maker with a damp cloth.
6. Plug in the ice maker and turn it back on.
7. Replace the ice bin and enjoy clean ice.
Regular cleaning will keep your Whirlpool ice maker in optimal condition and ensure the quality of your ice.
A Whirlpool ice maker is a convenient appliance to have in any home bar. It produces up to 50 pounds of ice in 24 hours, ensuring you always have ice on hand. However, over time, mineral deposits can build up in the ice maker, causing discoloration and inconsistent ice quality. This is where the built-in electronic clean cycle comes in handy.
If the “Cleaning Cycle” button is illuminated or nine months have passed since the last cleaning, it’s time to clean your Whirlpool ice maker. Follow these easy steps to ensure your ice maker produces clean and refreshing ice.
Step 1: Check the Cleaning Status Light
Check the cleaning status light on your ice maker. If it’s yellow, clean your ice maker soon. If it’s red, clean your ice maker immediately. If you can’t clean it right away, refrain from using it until you can. Even if the light is not yellow or red, according to Whirlpool, you should still clean your ice maker every nine months.
Step 2: Clean the Exterior
Clean the exterior of your ice maker with hot water and mild soap. Use a soft cloth to gently scrub away any dirt or oil buildup. Wipe dry with another clean cloth.
Step 3: Turn Off the Ice Maker
Turn off the ice maker and allow all the ice to fall into the storage bin. Remove the ice from the bin and open the drain cap to let the water drain out. Use paper towels to absorb any excess moisture inside the ice maker. Replace the drain cap securely.
Step 4: Add Cleaning Solution
Add a pre-measured amount of ice maker cleaning solution to the water pan. Check the package directions to ensure you add the correct amount of cleaning solution and water. Hold down the “Clean” button until the light starts blinking, indicating the cleaning cycle has begun.
Step 5: Verify the Ice Maker’s Condition Post-Cleaning
Allow the cleaning process to conclude before proceeding. Typically, Whirlpool models require 70 minutes for a cleaning cycle. Take off the drain cap and observe whether any cleaning solution remains inside. If there is any, run the cleaning cycle once more, this time exclusively with water. If no cleaning solution drains out of the ice maker, reinsert the drain cap. Reactivate your ice maker. It is now set to produce ice once more.
FAQ
1. How often should I clean my Whirlpool ice maker?
You should clean your Whirlpool ice maker at least once every six months. Regular cleaning helps ensure that the ice produced is fresh and free from any impurities or odors. However, if you notice any buildup or discoloration in the ice, it is recommended to clean the ice maker immediately.
2. What is the best way to clean a Whirlpool ice maker?
To clean your Whirlpool ice maker, start by unplugging it from the power source. Empty the ice bin and discard any remaining ice. Mix a solution of warm water and mild dish soap. Use a soft cloth or sponge to wipe down the interior surfaces, including the ice bin and ice maker components. Rinse with clean water and dry thoroughly before plugging it back in.
3. Are there any specific cleaning products I should use or avoid?
It is recommended to use mild dish soap and warm water for cleaning your Whirlpool ice maker. Avoid using harsh chemicals, abrasive cleaners, or bleach as they can damage the ice maker components. Additionally, do not use any sharp objects or utensils to clean as they can cause scratches or other damage.