Quck answer
If your KitchenAid ice maker flashes two times, it indicates a problem that needs troubleshooting. Here are some steps to help you fix the issue:
1. Check the water supply: Ensure that the water supply is connected properly and that there is enough water pressure. Low water pressure can cause the ice maker to malfunction.
2. Inspect the water filter: If you have a water filter, check if it is clogged or needs replacement. A clogged filter can restrict water flow and affect ice production.
3. Clean the ice maker: Remove any ice or debris from the ice maker. Use a soft cloth to wipe the interior and exterior surfaces.
4. Reset the ice maker: Unplug the refrigerator for a few minutes and then plug it back in. This can reset the ice maker and resolve minor issues.
If these steps don’t resolve the problem, it’s recommended to consult the KitchenAid user manual or contact their customer support for further assistance.
If your KitchenAid ice maker is flashing, there could be a few reasons why. Luckily, there are several solutions to fix the blinking lights issue on the ice maker once you know what’s causing it.
By troubleshooting common issues that require a reset, you can stop the KitchenAid refrigerator lights from pulsing. Identifying the problem can help you save time and money.
Preparing to Troubleshoot the Ice Maker
If you plan to remove or repair the ice maker, turn off or unplug the refrigerator. If the repair will take longer than an hour, store all food in coolers. You’ll only need a set of screwdrivers to reset or replace the ice maker. Have some bowls to hold screws and parts as you remove them for convenience. Place towels under the ice maker to quickly clean up spills that can cause an accident.
Change the Water Filter
The water that flows to your KitchenAid appliance has to travel a long distance, gathering impurities and minerals along the way. The water filter removes impurities and can get clogged with hard water deposits, slowing down the production of ice. If the ice maker isn’t filling with water, it could be a problem with the water filter or lines. It’s recommended to change the water filter every four months if the refrigerator is used frequently. Check that the water filter has been changed recently and is properly installed if the ice maker continues to not make ice or the lights keep blinking.
Reset the KitchenAid Ice Maker
The KitchenAid ice maker reset process is simple. First, make sure the manual switch on the ice maker is turned on. Tap the plastic tab on the door jamb to turn off the light. Shut the freezer door and wait for 10 seconds before opening it. Press the door switch three times and shut the door. Let the ice maker reset for a few seconds, and the blinking lights should stop. You can refer to the manual for a list of KitchenAid ice maker troubleshooting tips. If the ice maker is jammed with ice, remove the ice on the ejector arm with a plastic utensil.
Check the Optic Sensor
The bin sensor inside the KitchenAid ice maker can get blocked by ice or hard water deposits. Remove any ice that’s blocking the sensor. Clean the sensor with a soft towel dipped in warm, soapy water if it’s scaly. Don’t store anything in the freezer ice bin that can block the sensor or create a buildup of ice, such as soda cans or ice cream tubs.
FAQ
1. Why is my KitchenAid ice maker flashing two times?
If your KitchenAid ice maker is flashing two times, it indicates a problem with the optics system. The optics system is responsible for detecting the level of ice in the bin and controlling the ice maker’s operation. The flashing light is a signal that there is an issue that needs to be addressed.
2. How do I reset my KitchenAid ice maker that is flashing two times?
To reset your KitchenAid ice maker that is flashing two times, you can try the following steps:
1. Unplug the ice maker from the power source for about 5 minutes.
2. Plug it back in and wait for about 2 minutes to see if the flashing light goes away.
If the flashing light persists, it may be necessary to call a professional technician for further assistance.
3. Can I fix the issue causing the two-time flashing on my KitchenAid ice maker myself?
While some issues with the KitchenAid ice maker can be resolved by simple troubleshooting steps, fixing the specific problem causing the two-time flashing may require professional expertise. It is recommended to consult the user manual or contact KitchenAid customer support for guidance. Attempting to fix the issue without proper knowledge or experience may cause further damage to the appliance.
4. What are some common causes of the two-time flashing on a KitchenAid ice maker?
The two-time flashing on a KitchenAid ice maker can be caused by various issues, including:
– Blocked or frozen water supply line
– Faulty optics system or control board
– Ice bin not properly aligned or installed
– Malfunctioning ice level sensor
– Inadequate water pressure
Identifying the exact cause requires careful inspection and, in some cases, professional assistance.
5. How can I prevent the two-time flashing issue on my KitchenAid ice maker?
To prevent the two-time flashing issue on your KitchenAid ice maker, you can take the following preventive measures:
– Regularly clean and maintain the ice maker, ensuring there are no blockages or obstructions.
– Check the water supply line for any leaks or kinks that may affect water flow.
– Avoid overfilling the ice bin, as it can lead to malfunctioning of the optics system.
– Follow the manufacturer’s instructions for proper installation and alignment of the ice bin.
– If you notice any recurring issues or abnormalities, contact KitchenAid customer support for assistance.