Quck answer
To adjust the flame on your gas range, follow these steps:
1. Locate the burner control knob for the desired burner.
2. Turn the knob to the “Off” position and wait for the burner to cool down.
3. Remove the burner grate and burner cap, if applicable.
4. Look for the air shutter, which is usually located near the burner. It controls the amount of air mixed with the gas.
5. Use a screwdriver to adjust the air shutter. Opening it will increase the flame, while closing it will decrease the flame.
6. Turn the burner control knob to the desired flame size and test it by turning the burner on.
Remember to exercise caution when working with gas appliances.
If the pilot flame of your gas range is too high, it can damage the cooktop. Conversely, if it’s too low, you’ll have to keep relighting it. Here’s a guide on how to adjust the flame to achieve the perfect level.
Step 1
Locate the tube that supplies the burner. It has a burner air adjustment that mixes the air and gas.
Step 2
Determine the type of burner air adjustment you have. It will either be a barrel-shaped chamber or a triangle-shaped one with a cover plate.
Step 3
Loosen the air-shutter screw on the barrel-shaped adjustment. This screw is found on the end of the barrel closest to the burner.
Step 4
To increase the flame, turn the shutter counterclockwise to open it, which allows more air into the mix. To decrease the flame, turn it clockwise to close it and reduce the air in the mix.
Step 5
Loosen the screw that holds the plate on the triangle-shaped adjustment. Don’t remove the screw; it only needs to be loose enough to move the plate.
Step 6
Adjust the plate so that the opening is more closed to lower the flame or more open to increase it.
FAQ
1. How do I adjust the flame on my gas range?
To adjust the flame on your gas range, start by locating the burner’s control knob. Turn the knob to the “High” setting and wait for the flame to reach its maximum height. Then, turn the knob to the desired heat setting. If the flame is too high or too low, you can adjust it using the air shutter located near the burner. To decrease the flame height, open the air shutter by turning it counterclockwise. To increase the flame height, close the air shutter by turning it clockwise. Make small adjustments until you achieve the desired flame height for optimal cooking.
2. Why is the flame on my gas range too high?
If the flame on your gas range is too high, it could be due to a few reasons. First, check if the burner’s control knob is set to the correct heat setting. If it is, the air shutter may be closed too much, restricting the airflow and causing the flame to be higher than necessary. To fix this, open the air shutter by turning it counterclockwise until the flame height decreases to the desired level. Additionally, a dirty burner or clogged gas line can also cause a higher flame. In this case, it is recommended to clean the burner or contact a professional for assistance.
3. Why is the flame on my gas range too low?
If the flame on your gas range is too low, there are a few possible reasons. First, check if the burner’s control knob is set to the correct heat setting. If it is, the air shutter may be open too much, allowing too much air into the burner and causing a weak flame. To fix this, close the air shutter by turning it clockwise until the flame height increases to the desired level. Another reason for a low flame could be a clogged burner or gas line. In such cases, it is recommended to clean the burner or seek professional help to ensure proper gas flow.