Quck answer
To adjust a Kenmore LP gas orifice oven, follow these steps:
1. Turn off the gas supply to the oven and unplug it from the power source for safety.
2. Locate the orifice hood on the oven burner. It is usually found near the front of the burner.
3. Use a wrench to loosen the orifice hood and remove it from the burner.
4. Replace the current orifice with the LP gas orifice. LP gas orifices are smaller in size compared to natural gas orifices.
5. Tighten the new orifice hood securely onto the burner using the wrench.
6. Reconnect the gas supply and plug in the oven.
7. Test the oven to ensure it is working properly.
By following these steps, you can successfully adjust a Kenmore LP gas orifice oven.
If you’ve purchased a Kenmore gas oven and want to use it as an LP gas system, you’ll need to convert it. Kenmore ovens are originally set up for natural gas, but converting it to LP gas is a simple process. Your oven may come with a kit for conversion, which involves adjusting the flame.
Adjusting the Flame
While converting your Kenmore oven from natural gas to propane is easy, adjusting the flame can be tricky. Most ovens don’t come with instructions for flame adjustment, but it only takes a few minutes to get it right.
Step One: Move the Stove
The oven is likely too close to the wall, so pull it away to access the back. Turn off the gas and disconnect the gas line using a wrench. Pull out the bottom drawer from the bottom oven to locate the oven orifice.
Step Two: Adjust the Orifice
The oven orifice is located at the back near the burner assembly. Locate the two brass fittings on the oven burner valve – one for the oven burner and the other for the broiler. Tighten the brass fitting to adjust the orifice.
Step Three: Remove the Hex Nut
Locate the hex nut underneath the gas valve and remove it with a wrench. Flip the pin over and reinstall the new hex nut with the wrench. Reconnect the gas line and turn the gas valve back on. Push the oven back against the wall before turning it on.
Step Four: Test the Oven
Turn on the gas to check the flame color. For an LP gas orifice oven, the flame should be blue with a yellow tip. If the flame is not this color, seek the help of a technician. Gas ovens are dangerous, so take precautions while fixing them.
FAQ
1. How do I adjust the gas orifice on my Kenmore LP gas oven?
To adjust the gas orifice on your Kenmore LP gas oven, follow these steps:
1. Turn off the gas supply to the oven and unplug it from the power source.
2. Locate the gas orifice, which is usually located near the burner. It may be covered by a metal cap.
3. Use a wrench to loosen the cap and remove it.
4. Use a screwdriver to turn the adjustment screw on the gas orifice clockwise to decrease the gas flow or counterclockwise to increase the gas flow.
5. Replace the metal cap and tighten it with the wrench.
6. Plug the oven back in and turn on the gas supply.
7. Test the oven to ensure it is functioning properly.
2. What tools do I need to adjust the gas orifice on my Kenmore LP gas oven?
To adjust the gas orifice on your Kenmore LP gas oven, you will need the following tools:
1. Wrench: to loosen and tighten the metal cap covering the gas orifice.
2. Screwdriver: to turn the adjustment screw on the gas orifice.
Make sure you have the correct size wrench and screwdriver for your oven model to avoid damaging the gas orifice or other components.
3. Why would I need to adjust the gas orifice on my Kenmore LP gas oven?
There are a few reasons why you may need to adjust the gas orifice on your Kenmore LP gas oven:
1. Conversion: If you have converted your oven from natural gas to LP gas, you will need to adjust the gas orifice to ensure the correct gas flow for proper operation.
2. Flame size: If the flame on your oven burner is too large or too small, adjusting the gas orifice can help achieve the desired flame size, which is important for even cooking and baking.
3. Gas pressure: If you are experiencing issues with the gas pressure in your oven, adjusting the gas orifice can help regulate the flow of gas and improve performance.