Quck answer
To reset a GE washing machine, follow these steps:
1. Unplug the machine from the power source.
2. Wait for at least 1 minute to allow the machine to fully power down.
3. Plug the machine back in.
4. Open and close the lid of the washing machine 6 times within 12 seconds.
5. The machine will enter a diagnostic mode and start a series of tests.
6. Wait for the tests to complete, which may take a few minutes.
7. Once the tests are finished, the machine will reset to its default settings.
8. You can now use the washing machine as usual.
Discovering that your washing machine is stuck in a cycle can be a frustrating experience, but before you panic and call a repair person, try resetting the washer yourself. Fortunately, resetting GE washing machines, including those that use the Hydrowave system, is a straightforward process that can save you time and money.
Why You Might Need to Reset Your GE Washer
The reasons for a washing machine malfunction and the reset process may vary depending on your GE model. For instance, Hydrowave washer problems usually stem from motor issues. Resetting the motor may be necessary due to an unbalanced load, power outage, or power surge. On the other hand, other GE washers may experience a pause during the cycle, causing the electronic controls to lock up. This may be due to a power failure or pressing the stop/pause button instead of resetting it. Regardless of the cause, resetting the washer is an easy fix you can try.
Resetting a GE Hydrowave Washer
Resetting a GE washing machine that uses the Hydrowave system is easy. Start by unplugging the washer for a minute, then plug it back in. Open and close the lid six times within 12 seconds. Raise the lid at least 2 inches and ensure it closes properly each time. This should reset the motor. Test the reset by running a cycle without laundry. If the washer fills and runs normally, you can resume washing clothes. If the problem persists, contact a professional.
Resetting Other GE Washing Machines
For other GE washing machine models, unplug or turn off the washer for 30 seconds. Turn the timer knob once, but not to the final spin setting. Ensure the water is on, turn on the power, and test the machine. If the issue persists, contact a professional. To schedule a service appointment online or call GE Appliance Service at 1-800-432-2737.
FAQ
1. How do I reset my GE washing machine?
To reset your GE washing machine, start by unplugging the appliance from the power source. Wait for about 1 minute and then plug it back in. Next, open the lid of the washing machine and close it firmly. Finally, press the “Start” button to initiate the reset process. The machine should now reset and any error codes or issues should be cleared. If the problem persists, consult the user manual or contact GE customer support for further assistance.
2. Why would I need to reset my GE washing machine?
There are several reasons why you might need to reset your GE washing machine. One common reason is if the machine is experiencing a malfunction or displaying an error code. Resetting the machine can help clear any temporary glitches or errors and restore it to its normal functioning. Additionally, a reset may be necessary after a power outage or if the machine has been idle for an extended period. It is also a recommended step before contacting customer support, as it can often resolve minor issues on its own.
3. Will resetting my GE washing machine delete any saved settings?
No, resetting your GE washing machine will not delete any saved settings. The reset process is designed to clear temporary errors or issues and restore the machine to its default settings. It does not affect any personalized settings or preferences that you have set, such as wash cycles, water temperature, or spin speed. However, if you want to restore the machine to its factory settings and erase all saved settings, you can perform a factory reset, which is a different procedure and may vary depending on the model of your GE washing machine.