Quck answer
To reverse a Hampton Bay ceiling fan with the remote control, follow these steps:
1. Make sure the fan is turned off and the remote control is within reach.
2. Locate the reverse switch on the remote control. It is usually labeled with an arrow indicating the direction of airflow.
3. Press and hold the reverse switch button for a few seconds until you see the fan blades begin to spin in the opposite direction.
4. Release the button and wait for the fan to come to a complete stop before changing the speed or turning it on again.
Remember to consult the user manual for your specific Hampton Bay ceiling fan model for any additional instructions or troubleshooting tips.
Hampton Bay ceiling fans are designed to provide a comfortable environment by circulating air in different patterns. They can rotate in either direction to produce either a cooling or warming effect. Some models of Hampton Bay fans come with a remote control device that allows adjusting operating times, temperatures, speed, and rotation direction. The process of changing the direction of a remotely controlled Hampton Bay fan is simple and takes only a few seconds.
Step 1
Switch on the fan by pressing the “auto” button or the “lo,” “med” or “hi” buttons on the remote control, depending on the fan model.
Step 2
To reverse the rotation of the fan, press the button marked “reverse” or “for/rev” on the remote control.
Step 3
If the weather is warm, set the rotation to a counterclockwise direction for a cooling effect. In cooler weather, set the rotation to a clockwise direction for a warming effect.