Quck answer
To attach the BEKVAM spice rack to a wall, follow these simple steps:
1. Gather the necessary tools: a drill, screws, wall anchors (if needed), a level, and a screwdriver.
2. Decide on the placement of the spice rack on the wall. Use a level to ensure it is straight.
3. Mark the mounting holes on the wall using a pencil.
4. If the wall is made of drywall, use wall anchors to provide extra support. Drill pilot holes at the marked spots and insert the wall anchors.
5. Place the spice rack against the wall and align it with the marked spots.
6. Insert the screws through the mounting holes of the spice rack and into the wall anchors or directly into the pilot holes.
7. Tighten the screws using a screwdriver until the spice rack is securely attached to the wall.
Now, you can enjoy the convenience of having your spices neatly organized and within reach on your newly attached BEKVAM spice rack.
The BEKVAM spice rack, which is made and sold by IKEA, has a natural birch wood finish that can be sanded or stained to match your preference. While it can be placed on a kitchen counter surface, it also features two keyholes that allow it to be hung on a wall. Mounting the spice rack on the wall requires placing a few screws in the right spots.
Step 1
First, assemble the spice rack completely and then hold it up to the wall where you want to hang it. If necessary, adjust the rack’s position and make sure there is enough room above it to easily remove the spice bottles.
Step 2
Next, use a pencil to make a small mark on the wall at the top edge of the spice rack. Make another pencil mark on the wall at each side rail. Measure the distance from the side rail edge to the keyhole opening and mark where the screws should be placed, inside the side edge marks. Set the spice rack aside.
Step 3
Use a stud finder to scan over the screw placement marks and see if there is a wall stud behind them. If there is, additional anchors are not needed. Hold a level horizontally against the wall to ensure that the pencil marks are precisely aligned, adjusting them if necessary. Measure the distance from the top of the spice rack to the top of the keyhole opening, and adjust the screw placement marks so they are the same distance below the mark that indicates the top of the spice rack, while still keeping the correct distance from the side edges.
Step 4
Insert a 1/4-inch diameter bit into a drill and hold the drill bit against one of the screw placement marks. If there is a stud present, drill a 1-inch deep hole into the stud. If there is no stud, drill deep enough to puncture the wall. Repeat this process for the second placement mark.
Step 5
If there is no stud behind the holes, insert the rounded end of a plastic anchor into the holes. Push the anchors in as far as possible with your fingers, then tap them lightly with a hammer until the top rim of the anchor is flush with the wall surface.
Step 6
Insert a 1-inch long wood screw into the stud hole or the wall anchor and tighten it with a power drill until only 1/4-inch of the head is exposed.
Step 7
Finally, pick up the spice rack and hold it up to the wall. Feel the back of each side rail with your fingers to locate the keyholes and slide the keyholes over the exposed screw heads.
FAQ
1. Can the BEKVAM spice rack be attached to any type of wall?
Yes, the BEKVAM spice rack can be attached to various types of walls, including drywall, plasterboard, and wood. However, it is important to use the appropriate screws and anchors based on the type of wall you have.
2. What tools do I need to attach the BEKVAM spice rack to a wall?
You will need a drill, a screwdriver, a level, a pencil, screws, and wall anchors (if necessary). Make sure to have the correct drill bit size for the screws and anchors you are using.
3. How do I determine the best placement for the spice rack on the wall?
Before attaching the spice rack, consider the height and accessibility. It is recommended to install it at a height that is easily reachable and convenient for you. You can use a level and a pencil to mark the desired placement on the wall.
4. Can the BEKVAM spice rack hold heavy spice jars?
While the BEKVAM spice rack is sturdy, it is designed to hold lightweight items such as spice jars. If you plan on storing heavy items, it is recommended to distribute the weight evenly across the rack or consider additional support.
5. How many screws should I use to attach the BEKVAM spice rack to the wall?
The BEKVAM spice rack comes with pre-drilled holes for two screws. It is recommended to use both screws to ensure stability and to prevent the rack from tilting or falling off the wall.
6. Can the BEKVAM spice rack be painted to match my kitchen decor?
Yes, the BEKVAM spice rack can be painted to match your kitchen decor. Before painting, lightly sand the surface to create a better adhesion for the paint. Use a primer and the desired paint color to achieve the desired look.
7. Are there any alternative uses for the BEKVAM spice rack?
Yes, the BEKVAM spice rack can be used for various purposes. It can be used to store and display small items such as nail polish, essential oils, or small figurines. The versatile design allows for creativity in how it is used and displayed.