Quck answer
If there is water standing in the bottom of your KitchenAid dishwasher, there are a few troubleshooting steps you can take. First, check for any clogs or blockages in the drain hose or filter. Clean these out if necessary. Next, make sure the dishwasher is level and properly installed, as an uneven installation can cause water to pool. If these steps don’t solve the issue, it could be a problem with the pump or motor. In this case, it’s best to contact a professional for repair or replacement. Regular maintenance, such as cleaning the filter and checking for clogs, can help prevent this issue in the future.
KitchenAid, a subsidiary of Whirlpool Corporation, has been providing reliable kitchen appliances since 1919. They offer a range of built-in dishwashers with various cleaning cycle options. If your KitchenAid dishwasher is not draining properly, it may leave standing water at the bottom. This may be due to an incomplete cleaning cycle or a blocked or bent drain hose. Fortunately, you can troubleshoot and fix this problem within minutes.
Step 1
Close the dishwasher door and press the “Start/Resume” button.
Step 2
Turn off the power supply to your KitchenAid dishwasher from the circuit breaker box. Locate the corresponding switch and flip it to the “Off” position.
Step 3
Remove the bottom toe panel below the dishwasher door to access the drain hose. Unscrew the two screws that attach the panel to the dishwasher. Look for the dishwasher drain hose, which is a 1-1/2 inch rubber hose. Check for any kinks or twists. Place a pan under the hose to catch any water that may spill out.
Step 4
Disconnect the drain hose from the dishwasher pump. Use pliers to squeeze the wire clamp at the pump end of the hose. Move the clamp down the hose length to get it out of the way. Pull the hose free from the dishwasher pump. Pinch the wire clamp at the other end to disconnect it from the sink. Hold one end of the hose to your faucet and run hot water through it to remove any blockages. Reattach both ends of the drain hose by reversing the disassembly process.
Step 5
Reconnect the power supply to your KitchenAid dishwasher. Flip the corresponding circuit breaker switch to the “On” position.
Step 6
Press the “Cancel/Drain” button on the dishwasher control console on the door.
FAQ
1. Why is there water standing in the bottom of my KitchenAid dishwasher?
There are several possible reasons for water standing in the bottom of your KitchenAid dishwasher. One common cause is a clogged drain hose or a blocked garbage disposal. Check these areas and clear any obstructions if necessary. Another possible reason is a malfunctioning drain pump. You can test the drain pump by running a diagnostic cycle on your dishwasher. If the drain pump is not working properly, it may need to be replaced. Additionally, check the dishwasher’s float switch and make sure it is not stuck in the “up” position. If it is, try gently pushing it down to see if that resolves the issue.
2. How can I fix a KitchenAid dishwasher that won’t drain?
If your KitchenAid dishwasher is not draining, there are a few steps you can take to fix the issue. First, check the dishwasher’s drain hose for any clogs or kinks. Clear any obstructions and straighten out any kinks if necessary. Next, inspect the dishwasher’s drain pump for any blockages. If you find debris or foreign objects, remove them carefully. You can also try running a cleaning cycle with a dishwasher cleaner to remove any buildup that may be causing the drainage problem. If these steps do not resolve the issue, it is recommended to contact a professional technician to diagnose and repair the dishwasher.
3. Why is my KitchenAid dishwasher not draining completely?
If your KitchenAid dishwasher is not draining completely, there are a few potential causes to consider. First, check the dishwasher’s filter and clean it if it is dirty or clogged. A blocked filter can prevent proper drainage. Additionally, make sure the drain hose is installed correctly and not kinked or bent. Another possible reason for incomplete drainage is a malfunctioning drain pump. Test the drain pump by running a diagnostic cycle on your dishwasher. If the drain pump is faulty, it may need to be replaced. Lastly, check the dishwasher’s air gap or garbage disposal connection, as they can also contribute to drainage issues. If necessary, clean these components or seek professional assistance if the problem persists.